admin

About admin

Posts by :

Finding the Right Person for Tankless Installation

Finding the Right Person for Tankless Installation

Tankless water heaters offer added luxury, less energy usage and big savings. Due to this advantages, most people are turning to top quality tankless installation of water heaters made by Noritz. However, the biggest challenge that makes people keep hesitating on the use of tankless water heater is actually on the right person who can perform the installation of the same.

Importance of Tankless Installation

Tankless Installation

One of the greatest advantages of tankless hot water heaters is the fact that water is heated extremely fast. Depending on the gpm of the tankless water heater, it will produce continuous hot water based on the consumer’s needs.

Another importance of tankless installation is the savings of tankless water heaters offer. Because water heating accounts for almost 30 percent of a home’s energy bills, a tankless water heater can cut these costs by up to 50 percent savings. Tankless hot water heaters last an average of 20 years and are easy to maintain. They are also very small and can be put in many places that won’t allow conventional hot water tanks.

Who to Install Tankless Water Heater

Installation of tankless water heater requires qualified people, who have been trained and certified by Noritz to ensure success on installation. Majority, people find comments and recommendations from neighbors or search for a contractor online. Trained contractors of Noritz tankless installation are the best people who can do better services for the product. The non-knowledgeable contractors can cause such mistakes as insufficient makeup air and cross lines, improper venting and gas line sizing. This could pose a serious problem in future hence reducing the tankless water heater’s life.

Proper water heater installation should ensure that the cold water supply is routed into the tankless heater, which is a series of water pipes inside the heater. And the unit’s output be routed back into the hot water pipe that leads the rest into the house. Moreover, proper installation facilitates safely gas line installed into the unit. This is because Noritz tankless water heater is a highly efficient unit that circulates water through a heater as it is drawn towards the faucet.

Identifying a qualified contractor to install

However, locating a qualified contractor for the installation, one has to search the best Noritz tankless installers online. They do this to make sure that a person chosen is well established in the process of the installation and also ideal for the work. Online searching for the installer is a quick and easy way since their contact information is reachable, therefore one is contacted and a reply is arrived at very easily. Contact us today, as we are authorized Service provider for Noritz, Navien, Rinnai

Having reached to the best Noritz tankless water heater installer, installation can be done outside the home. Or mounted on the walls depending on the owner’s choice. Noritz tankless water heaters are more energy efficient saves money and adds new standard of luxury to the home. Therefore, by getting a well-trained water heater professional, then the average homeowners will effectively move to the tankless water heaters.

Noritz therefore, trains contractors always to ensure that they have the most recent information on the changing products.

 

 

Is It Bad to Pour Grease Down the Drain? Grease Clogs

Is It Bad to Pour Grease Down the Drain? Grease Clogs

,

Drain is purposed to carry off liquid surplus by causing it to flow, without solid particles and therefore should be a very fast process. Grease clogs poses great damage to the kitchen sink if cooking grease disposal is made through the sink. One of the dangers include expenses in carrying out repairs.

Why plumbers say it’s a bad idea to pour grease down the drain

grease clogs

Grease clogs are damaging.

During our young age, a lot was told about dairy products, food scraps, cooking oil that if they are flown through drains, it will obviously cause sink blockages. This happens when the substance get mixed with hot water that will cause hardening inside the drainage pipes once it cools down, hence becoming expensive to repair. Other types of greases such as thick grease causes back up in other parts of the affected area, for instance toilets making the whole compound nasty and messy.

Solutions to clogged sewers

Call a plumber to handle grease clogs.

By all means one has to get to a plumber to fix the problem if he/she cannot handle even the minor grease clogs. Major clogs definitely need a professional to undo the mess since some wastes drained through the sinks could be containing chemicals that can destroy the whole pipes. What plumbers do is that, they use auger to trace the situated buildup of the substance in order to unclog it.

Routine maintenance.

Prevention is better that cure. If the user ensures that proper disposal of waste materials is done, a plumber could not be having more calls here and there to fix clog issues. One of the routine maintenance practices is by pouring bleach through the drains, which is sodium hypochlorite, to sanitize working surfaces hence ensuring that such clogs do not buildup that can cause blockage by keeping the pipes clean. Furthermore, common sense also could work in that when washing dishes, food remains should be properly disposed in a trash and not through the drain, this can be achieved by use of paper towel to remove grease and food debris and pouring it in a container that will be easy to empty into a trash.

Lastly, filling sinks with hot water and letting it to flow after every use of the kitchen is a very important practice that will discourage clog buildup. Such practices therefore ensures that only pure water flows through the drains and hence serving an intended purpose.

 

Repiping Your Home? What to Expect From the Pros During The Process

Repiping Your Home? What to Expect From the Pros During The Process

Pipes that are old do not serve its purpose effectively. For instance, such pipes could be having rust on its walls that poses danger to users since the quality of water passing through such pipes is very low and on the other hand lowering the water pressure due to accumulation of rust. Therefore, the problem isn’t human generated and the best way to get out of such troubles is by considering repiping as prevention is better than cure anyway.

Basics of having your home repiped   

Repiping

Repiping of course is not a simple task that should be performed daily; below are some of the basics that one has to consider in repiping:

Inspection and estimates for repiping.  

Before thinking of a plumber, the owner of the house should first make an estimation of the areas that will need repiping this is, making plans and budget. Of course there are the cold and warm water pipes and from the knowledge of science, warm water accelerates rusting rates hence much considerations should be taken on warm water pipes to ensure that efficient replacement is done and approximation of cost is arrived at.

Preparation.

The plumber should be prepared enough in that he/she should have decided an alternative source of water to avoid messing up with normal house hold chores. More so, if the owner won’t be very keen on what the plumber is doing, such stuff as furniture, floor, walls and other basics that will be influenced by repiping will cause a lot of damage. So then the plumber should be informed in advance in order to avoid recklessness and if any need arises he/she will be able to fix it.

Installation.

Here the owner has to be very vigilant on the type of pipes that the plumber is going to use, knowing the advantage of one over the other in order to avoid shoddy work. Installation won’t take a day and therefore the owner should be patient enough to allow perfect work to be done.

Testing.

After installation of new pipes is done, re-inspection needs to be done to `ensure that there are no leakages. A plumber has to be around to make sure that such problems are fixed to avoid wastage of water. Testing also is done to ensure that the new pipes were installed properly and functions as expected.    

Drywall.

Whether you like it or not, walls have to be interfered with during repiping. Therefore the owner has to include a replacement budget for the walls to ensure that they are not left with the cuttings. Replacements can be done by the plumber himself or if not he can suggest someone professional to perform the task, hence making repiping a success.

How Much Does it Cost to Install a Water Main?

How Much Does it Cost to Install a Water Main?

,

Water mains is one of the things you really don’t want to deal with. Regardless of your existing predicament, you may want to ensure your water main is correctly installed from the start. For this, you will need to consult a professional plumbing company. Always look for a reputable professional plumbers who can help you determine the cost of installing water main in your property.

Factors determining how much installing water main will cost.

Access

Any kind of obstacle which will make it difficult to reach water main such as trees, will automatically raise water line cost. The whole course of getting to water main, or wherever the water main will require to be installed, builds up the cost of installing water main. If jackhammering through concrete is required then this will increase the new water line cost.

Depth

If the line needs to be dug deeper, then the higher the expense of installing water main will be. However, it can be less expensive if you can do this by yourself or use manual workers, and then for more technical plumbing work you bring in your plumbers.

Location

water main

The place you actually live, will help you determine the new water line cost. Pipes made of PVC are more affordable option to go for, though they cannot be used in some parts of the country, which experiences cold temperatures. While in some parts copper cannot be used because of the soil’s corrosive elements.

Red tape

Mostly one will need to get a permit before he/she can dig for a water line. Although this cannot directly be added to new water cost, but it is something you should consider. Therefore, you will want to ensure that is taken care of before you start working; so that you do not hold up any of the activities, especially if you still want to pay a professional while haven’t sort this out.

The cost of building a new water line will depend on different things, but the project is certainly one of the more practical home projects. Somehow it needs a connection to a meter that is nearby and connected to a city line or a city line. It is very important that all things are set up appropriately to prevent big problems as well as maintain safety, therefore, using a professional plumber is worth the price.

Sewer Line Explained

Sewer Line Explained

Who is responsible for sewer line going under the street?

sewer line

Not all plumbers in possession of regular licence have a qualification of working on underneath sewer line. This creates a great impact during maintenance as lack of awareness among home owners about bonded sewer contractors makes them believe that any plumber has approval to work on underneath street sewer lines. Concerned bodies such as the Department of Engineering gives a list of accredited experts on their website and that helps clients to identify if plumbers are approved to work on public sewerage systems.

Repipesacramento expert

This is accredited contractor who is legally allowed to work on public sewer lines.Concerned bodies gives a list of certified experts on their website who can work on underneath street sewer pipes whenever a sewer system problem arises.

What you should know about sewer line going under the street

There is almost 100% belief among property owners that any problem associated with underneath street sewer pipes is the municipal’s problem thus ignoring such menace when it occurs.

There is a problem with my sewer lateral will city fix it?

Property owners are charged with the responsibility of repair and maintenance of sewer lateral both upper and lower. The lower lateral connects property system to main sewer while upper lateral links house to property system. The municipal oversees maintenance of underneath public sewer pipes which must be done by a certified experts.

Why doesn’t the city repair my property sewer lateral under the street (lower lateral)?

The city and home owners oversee repair and maintenance of public and private systems respectively and any inconvenience associated with sewer should be assessed if its public or individual property owner problem before help is given accordingly. Lower sewer lateral extends to underneath street sewer line for safety purposes and the fact that its there doesn’t make it a municipal problem but rather an individual.

Can my plumber work on my sewer line.

Plumbers are allowed to intensively do their work on any sewer line as long as it is ones property which turns out to be right. A plumber is allowed to work on a public sewer line if they do have a regular licence as well as certification from concerned bodies such as department of engineering.

Sewer problems

Problems in the Sewer Line are both individual and municipality responsibility. Problems in the sewerage system arise as a result of blockage by the sewer content, how many years the sewer has been in service and naturally from the growth of the roots of a tree into a sewer line caused by poor connection which leads to moisture leakage thus creating a penetrative medium. Identification of the problems in the sewer is done by assessment of how the breakage has affected the users.

If individual owner in the whole neighborhood is affected then it is the owners connectivity that has a problem but if the whole neighborhood is affected simultaneously then the main sewer has a problem which needs rectification.When the problem at hand requires excavations when repairing then the expert should seek a permit from administrative bodies in charge. There are several laws in place that clearly define roles of individuals and municipality, certify plumbers, issuance of permits as well as role of house owners in maintenance of their property line.

The house connection sewers are not of general benefit.

This is because house connection solely serves an individual though the owner is allowed by the law to build a sewer line from their premises to public underground sewer under permission from concerned administrative bodies.

A sewer permit shall be issued to Bonded Sewer Contractors only.

The permission to work on public sewerage system usually under the street is granted to Bonded Sewer Contractors as well as those who meet requirements for certification which are clearly stated in the law.

Plumbing 101: PEX vs. Copper Piping

Plumbing 101: PEX vs. Copper Piping

,

If you want to build your home, want to repipe the existing pipes or you just want to replace a section of the pipe that is damaged, you have a variety of option to choose from. Copper is no longer the preferred or primary choice of plumbers and homeowners. Let’s go through PEX vs. Copper Piping and see which one to choose.

PEX also known as cross-linked polyethylene flexible tubing has recently grown in popularity for residential plumbing as an alternative to CPVC (chlorinated polyvinyl chloride) and copper piping.

Advantages of PEX vs. Copper Piping

Advantages of PEX

PEX vs. Copper Piping

It is pocket friendly, it usually costs at least twenty five percent less than copper and it’s the best alternative in areas which are too tight or small for rigid CPVC and copper pipes. Tubing of PEX is connected by snapping it into connecter fittings or by using crimp rings with compression tool. It installs faster, which substantially eliminates labor costs compared to installation of copper pipe.

Research done by scientists in the United States show that PEX pipe does not corrode. Also, PEX pipes do not allow building up of sediments inside the pipe. As a matter of fact, this pipe can expand about eight times its size before it freezes.

The popularity of PEX can be attributed to several factors, including resistance to chlorine and scale, flexibility, cost, and quicker installation with fewer fittings and connections. It is more efficient as it does not loose heat like copper. Even though PEX pipe is not ideal to be used outside, it’s much more resistant to bursting and freezing temperature.

One of the biggest disadvantage of copper is that it reacts to several metals that come in touch with it like galvanized clamps and nails. It also causes electrolysis that literally puts pinholes in the copper pipe. This pipes are prone to wearing down because of the flow of water throughout the pipe. When the flow turns the fitting, it wear out the edge or fitting of the pipe, making it to leak.

Advantages of copper

PEX vs. Copper Piping

Copper pipes for long has been the standard for plumbing and need a specific skillset for fitting and soldering/sweating pipes together. This is a job which anyone can do, but it needs patience and is best performed on a workbench and vise before practicing under the sink.

Copper has ideal attributes that make it best for plumbing. Pipe made of copper creates biostatic atmosphere that make it hard for bacteria to grow inside. It is also unaffected by UV rays and resist corrosion, which allows it to be used outdoors.

Having looked at PEX vs. Copper Piping it is up to you to decide which one to use in your home. Consult a professional plumber on the best piping system to use.

Dangers of delaying plumbing repair

Dangers of delaying plumbing repair

Did you know that a $100 plumbing repair if delayed may lead to $10000 fixing needs? Well, it is important to know that overlooking a plumbing problem may expose you to lifetime debts. Among other areas to be well maintained in a property, plumbing repairs require the first priority. Read below to find the common danger of delaying plumbing.

Below are common dangers of delaying plumbing

Water damage

delaying plumbing

Water damages starts with simple leaks that end up becoming huge pools of water covering the floor and ceilings in a home. Therefore, it is very important to know that delaying repair of leaking water in a home can be an underlying problem in future. Leaking showers, bathrooms and sinks result to severe health risks to the residents and neighbors. Moreover, sewage backups from the toilets to commercial centers, homes or institutions are a severe health hazard. Other water damages include; destroying the structural integrity of a home by damaging its property. Additionally, Pools of water after accumulation destroy the electronics and the hard wood flooring.

Mold growth

When Left leaking, water pools will definitely provide a perfect condition for growth of mold in the floor, corners of a house, ceilings and in the walls. Mold is a very serious problem that can seriously compromise the health of your family. Such problems include; induction of allergic reactions and many problems that emanate from the damage of the lungs. Children are most prone to health problems than adults when they breathe in the mold.

Water loss and structural damage

Most water sources in home are metered. A delayed repair of water closets, water faucets sinks, leaking taps in a house is a huge problem no matter how insignificant the impact may look at initial stages.  As water trickles slowly by slowly, storage tanks are being emptied after every minute. Eventually, you will realize that there is no water to use at home. Water leakages from the water tanks make the walls wet. The paint layers pill hence the building look messy and unattractive. Green molds rot on the walls and basements hence weakening the structure and foundation of a building.

Higher water bill

Water bills accumulate with every drop of water lost. This is because no matter how slow the trickling is, the water meter is still recording. Simple overlooked water leaking repairs can worsen hence increasing the loss of water. Then local water company will be after you until you settle the bills. Remember simple leaks can cause you to pay thousands of money for just wasted water.

A foul mood and Unpleasant odor production in a home

Defective plumbing system such as water damage and non functioning sewage system are very dangerous to the owner and surroundings. The foul mood and the unpleasant odor lead to unaesthetic conditions. Business premises with foul mood and unpleasant odor will definitely shun the clients away. In fact, foul mood and the unpleasant smell, may have you charged for violating building and health codes.

Conclusion

As discussed earlier on, you will realize that dangers of delaying plumbing repairs can pose serious risks and loses in the long run. It is therefore important to occasionally check your system and attend any problems as soon as they occur. Do not wait for plumbing episode that is alarming and cataclysmic in order to act.

Repiping Installation Procedure

Repiping Installation Procedure

To have a safe, efficient and reliable system; proper repiping installation is a very important step. The plumbing system works on very simple concept of water in and water out. In a home the plumbing system has three main components these are: the drainage system, the water supply system and appliances set.

Major Steps in a Repiping Installation

repiping installation

  • Site Inspection

For a successful and quick installation, an understanding of the project; plus the site where the project is taking place is very important. In the process of site inspection, the contractor is to outline every detail of the project and what is included. Also the contractor is to explain whether or not the drains; the faucet will require to be replaced during the installation process.

  • System Layout

Determining of the system layout is done when the job is agreed on. Here there is ordering of the materials for the new system.

  • Preparation

There is cleaning of the site before the new installation. Cleaning is done in all areas, around and behind your toilets, showers, sinks and faucets. If there are any additional requirements, the contractor will notify you.

  • Installation

Qualified professional are to handle the installation process for your new repiping system. This ensures efficiency, safety and reliability of the install.

  • Performance

When the installation is complete, test the system; if there are any necessary adjustments required they will be made. As a result, this ensures that the installation works properly.

  • Wall Repair

The city is to do an inspection and approve of the installation. However, it is the contractors who repair the walls as well as clean up the site.

  • Job Completion and Inspection

When the job is done, have a final walk-through of the installation with the contractor. This is to help you have an understanding of the aspects of the new repiping system. Plus you are able to ensure the work is done to your standards.

 

 

 

 

 

 

TIPS AND TECHNIQUES ON REPIPE AND ePIPE.

TIPS AND TECHNIQUES ON REPIPE AND ePIPE.

, ,

Is your water pressure low? Is Colored water (that can be red or orange) coming out of your water lines or faucet? Well, there is a reason for this. Your water pipes contain build-ups of Manganese, Calcium, iron and chemicals from water utilities. This did not happen recently but it must have been going on for several years now. As a result it causes relies of the colored water. This article will show you how to Repipe and ePIPE the water lines.

repipe

How to Repipe and ePIPE.

As you inspect your water lines, do not leave behind your hot water tank as it very important also. Sediments are found in the lines from the anode rod as it deteriorates. Therefore, this will require for the water tank to be fixed or replaced.

Repiping your house when it’s on a slab of concrete can be difficult.  Copper pipes, Galvanized pipes and PVC pipes are easy to replace. To start off you will need the following materials: flux, solder, hacksaw, pipe wrench or wrenches, Teflon tape, glue and primer, propane torch and ells.

To repipe you can choose to either use galvanized or plastic piping. First, turn off the water supply of the house. Ensure you link hot water and cold water to the hot water lines and cold water lines respectively. Water pipes are to be flushed from the faucet outside; thus removing the glue from the water lines. Air will also be removed from the lines in the process. Then go to each pipe to check for any leak or cracks. In order to attend to them as required.

Plastic fittings are used when repiping in between copper or galvanized pipes. The pipes need to have two terminals. One for grounding along with the ground wire, while the other to go across the plastic fitting. At times the ground source is able to use in house plumbing.

 

When Is It Time To Replace Your Home’s Galvanized Pipes.

When Is It Time To Replace Your Home’s Galvanized Pipes.

Galvanized Pipes

Is It Time for a Whole Home Repipe?

You may not know what the word re-pipe means, well a lot of people do not. As a matter of fact majority of homeowners also do not have any idea what it is until when they start experiencing some piping problem. Galvanized pipes are found mostly in households which were built around 1981. These pipes are not of good quality because they are vulnerable to corrosion. Due to that it is not easy to notice them corroding not unless a camera specifically used by plumbers is used. With time, the massive collection of corroded materials and deposits in the zinc coated pipes can lead to reduced water pressure, obstructs and leakages. Upon these damages, replacement of a part of the pipe may be necessary.

Plumbing problems are very common among homes built over 30 years ago. When home pipes start showing leakages or seepage, it is a clear indication of bigger damages to come. The best way to deal with such problem is having a plumber appointment. Considering the time it may take the plumber to get there, and fix the problem; smart use of the fixed plumbing material is necessary.  If the situation is bad it is necessary to contact an emergency plumber.

Repiping your entire house.

An entire household repiping is not a thing that anyone would like to be done on his home many times. It is the last alternative that pipe fixers will mention to their customers; however it is important in some conditions. Complete repiping is the most effective way to secure ones household from seepages and more water wastage.

Is it time for a whole home repipe? Here are questions that can help you determine if it’s the best move to make now:

Were you forced to contact the plumber a couple times in years due to leakage problems? How many times do you discover seepages? If it is recurrent that shows that your plumbing coordination is not up to standard.

Does your house have hard water?

Hard water is not a new term to you. This is the definition of water highly concentrated with calcium and magnesium. It is evident you have hard home water when you spot white or yellow- green accumulation on plumbing fittings. These accumulations lower water pressure. The most effective way is the use of plumbing camera to examine the pipes.

How old is your home (Is it Fixed with Galvanized Pipes)?

Nowadays households are characteristically fixed with either copper or plastic pipes; unlike aged households where you find galvanized pipes. Steel corrodes as time goes on and accumulates impurities like lead. In case your home is still fitted with steel pipes it is advisable to have a plumber look at their situation and decide if replacements with safe modern fittings are necessary.

Why is My Home Pressure So Low? (Causes of Low Pressure)

Why is My Home Pressure So Low? (Causes of Low Pressure)

low pressure

Low pressure can cause chaos in the house. This is experienced while cleaning the dishes in the sink, taking a shower or even doing a dishwasher work.  To get back to the peak performance of the house, the problem needs to be identified and fixed.

 

Problems Causing Low Pressure in Pipes

  1. Corroded galvanized iron pipes

This is a common cause of having low pressure. Older houses have galvanized iron pipes; which in time it corrodes from the inside. Therefore, the corrosion will eventually inhibit the flow of water. Corrosion builds up usually behind restrictions in the pipes; this includes; an angle valve in the bath, shower, and under the sinks. To repair, turn off the water in the house, then using two pipe wrenches; one for turning the valve and the other is for preventing the pipe from turning. When the valves are off the hard, corroded material is seen. Using a hammer or screwdriver chip the corroded material out. Then run water to flush out any debris after reconnecting the valves.

  1. Pressure regulator

This is a bell-shaped device that is in front of the house; the pressure regulator is preset by the manufacturers hence, do not need to be adjusted. Although they do get spoiled sometimes, causing the pressure to reduce. A plumber can be called to replace it so as to get the pressure back.

  1. Leaking or turned off valves and pipes

Having a leaking or a turned off pipe or valve respectively; can cause the pressure to reduce. Therefore, the pipes are to be checked to ensure there is no leaking, as the leak can cause the pressure through the pipes to be released unto the ground. It is also important to check the valves, to ascertain that it is turned on.

In case the shortlisted problems, are not found to be the cause of low pressure in the house; contact a professional plumber, to come and take a look at your plumbing system.

 

Noisy Pipes

Noisy Pipes

,

When pipes make noises it could be due to the following reasons which include; clogs, weather or other numerous reasons. It is advised that homeowner’s check, what is causing the noisy pipes and connect to a professional plumber.

Noisy Pipes

Factors Causing the Noisy Pipes.

1. WATER HAMMER.

When the faucet is shut, water flow will be brought to an abrupt halt. The water flow, was rushing through the pipes and out of the faucet at a high speed and force. Therefore, the energy emitted would need to go somewhere. Hence, the need of having an air chamber in the pipe, behind the cold and hot water faucet. The air chamber pipe is about 10 inches of pipe which is soldered vertically; turning off of the faucet as water rushes through, will result to pushing up of the vertical pipe; which will hit a cushion of air in the pipe. As a result, the water force will not cause a rattle or hammer of pipes.

Over the years hammering develops because the air in the vertical riser is lost. Therefore, the cushioning effect is lost too. This can be rectified by turning off the main water, draining the faucets by opening all of them. Hence, air is pushed into the risers that are designed to prevent water hammer.

2. LOOSE PIPES UNDER THE HOUSE.

A rattling effect is also heard when water is flushed. This is because the flushed water is in large volume and it moves rapidly thus, causing the pipe to sway that will lead to the rattling sound. For drain pipes stabilization can be all that is needed, as they are suspended from the floor under the house.

3. WORN OUT WASHER IN A FAUCET OR VALVE.

This causes the squealing of pipes. Valves connecting to the washing machine are a common source of squealing. If the squealing sound is heard when the washing machine is on; well then the problem can easily find a solution. Turn off the valve; check the washers in the hose. If they look cracked and worn out replace them. If that is not the problem, turn off the house water and repair the faucet. As one of the valve seat or the faucet’s washer is worn. Thus causing the water to be forced out from a small opening hence, causing the noise.

4. WORN BALLCOCK ASSEMBLY.

When the ballcock assembly is worn, it causes a rattling sound at the end of the fill cycle after flushing. The ballcock assembly controls the fill process of the toilet. Therefore, one may need to repair or replace it depending on its style and how new it is.

Four Ways To Tell If You’re Pipes Are Worn Out.

Four Ways To Tell If You’re Pipes Are Worn Out.

, , ,

Living in an older home requires regular checkup of the pipes. This is more critical as compared to a new house. This is due to the fact that when the plumbing system ages, the pipes will start to showcase problems. Signs of pipes are worn out is to be put into consideration; in order to ensure that extreme damage is not met. The basement, the utility rooms, and crawlspaces; are areas to look for clues of pipes that are damaged; and would require replacement.

The following are clues that show if your pipes are worn out.

1. Leaks

Pipes Are Worn Out

Small leaks should not be ignored, as they are a warning of something serious is wrong with your pipes. Hence, a replacement of the pipes will be required. Also, as the pipes are as old as the house then they will be deteriorating. Mold grows or presence of mildew is certain signs of leaks in your house. This is because mold grows in environments that are moist; as a result, the leaking pipes provide a suitable condition for the mold to grow.

The leak is mainly hidden behind walls or beneath the floor. Mildew in the shower is not alarming for a leak, as in the case of; seeing it anywhere else as this could be a substantial problem. Plus the musty smell of mildew and of the mold is unmistakable. When you have had a thorough cleaning of your house; and the smell is still there then there could be a leak in the pipes.

Pipes Are Worn Out

2. Discolored Water.

When you notice that your water is discolored, as it comes out from taps; a plumber should be called immediately. For this is an indication that your pipes most likely have rust. Which not only makes the water taste unpleasant; but it also causes the water to harden and therefore, rinsing of clothes, dishes and your skin of soap becomes difficult.

3.  Stains

Pipes Are Worn Out

When there are stains or discoloration underneath your sink or on the walls; this is an indication of a problem.  The walls are to be checked of any stains or warping. When the drywall becomes moist and starts to bubble; the wall warps and will eventually break apart.

4. Tube Corrosion.

When pipes tubing shows dimpling or flaking, this is an indication of considerable corrosion in the pipes. For copper pipes, when they are idle for a long time it leads to; corrosion and the water reacting with the flux used to connect the pipes.

To tell the condition of your pipes, there needs to be regular checkup of the pipes. If you cannot do it yourself, a qualified plumber should be contacted/contracted to check your plumbing system. Pipes are worn out due to varying reasons, so check your system as many times as possible.

What are the Best Materials For Repiping My Home?

What are the Best Materials For Repiping My Home?

Repiping being one of the most important things to do in your house, it is the largest plumbing job your house requires. The plumbing system of an older house could be of; galvanized steel or even iron pipes. These material are prone to rusting over time hence, require to be replaced. There are multiple choices of the kind of material to be used in repiping a house; always ensure you go for the Best Materials for Repiping.

Best Materials for Repiping

When it comes to repiping a whole house, plumbers can combine different piping material for the repiping. Such materials create a new plumbing system that can serve well; and for a longer time before it is replaced. Experienced plumbers are to determine the right combination of the plumbing materials. This is because, they are well aware of the pros and cons of the different pipes materials.

Best Materials for Repiping

The following are some of the best material to be used for re-plumbing, they include;

  • CPVC: The plumbing system uses many types of plastic piping. The chlorinated polyvinyl chloride being the most common. This is due to the fact that; the CPVC is a stronger polymer than the standard PVC pipes. It is able to withstand high temperatures thus making it ideal for hot water.
  • COPPER: This is the most used metal in plumbing today. This is due to its corrosion resistance therefore; it gives service for a longer period. It is more flexible and lighter than steel hence, making it unlikely to break when under pressure.
  • PEX: The cross-linked polyethylene pipes are the latest plastic to enter the plumbing field. They are an alternative to the CPVC pipes. They are easy to install into tight places due to their high flexibility. PEX can last longer than the CPVC and it is less pricey than copper. It has less heat loss as a result it is more energy efficient
Nobody Will Get an Accurate Plumbing Job Done Faster than a Professional Plumber

Nobody Will Get an Accurate Plumbing Job Done Faster than a Professional Plumber

professional plumber

Are you a person who want a plumbing problem that keeps on lingering for days? Because this is what will happen if you employ an amateur plumber to do a plumbing job in your home. However, when you go with training and experience, the plumbers will have your plumbing job done fast and accurately; and they will have it done right. Therefore, always go for professional plumber no matter what.

Licensed Plumbers Protect You and Your House

Plumbers who are licensed have legal consent/permission to offer quality plumbing services in their state; therefore, they will be accountable to a regulatory board when/if they violate rules. Ensure your plumber has been licensed. Licensing indicates that the plumber has been well trained and received appropriate professional training, as well as undergone continuous education. This shows that when you hire a plumber who is unlicensed, you will not have any guarantees that the person has an understanding of local codes, adequate training, or will not attempt to defraud you.

Professional Plumber Save You Cash

One of the main reason why most homeowners turn to amateur plumbers to handle their plumbing projects is mostly from the belief that they will save some cash. Unfortunately, it won’t! Apart from the reasons, which we have listed for you above, of why you should avoid amateur plumbers; you should know that the mistakes/errors unlicensed plumbers make on your plumbing system, it will end up costing you more money. With professional plumbers, the job will be done right and accurately the first time; this will surely save you cash on future issues like early replacements, additional repairs, water waste, or recovering from serious water damage.

In a nutshell, no one will get an accurate plumbing job done faster than a professional plumber. Therefore, always go for a licensed, trained and professional plumber in the market.

How To Fix Leaking Pipes Under A Slab Foundation.

How To Fix Leaking Pipes Under A Slab Foundation.

,

leaking pipes

Leaking pipe underneath your foundation can result from a damaged water or sewer line. Mending the damaged line is not as hard as it is in locating and gaining access to the damaged line. Locating the general area of the leak is necessary; once the area is located, you will have to chisel through the concrete to the pipes in order to repair it. This article will explain to you how to fix leaking pipes under a slab foundation.

Signs of a Slab Leak.

  • The occurrence of water or damp spots on the floor. Warm spots on the floor are because of leaking hot water.
  • The sound of rushing water beneath your floor; is another giveaway of lines leaking.
  • High water bill because of the continuous running of water.

Indications of a Sewer Line Leak (leaking pipes).

Leaks from sewer lines usually go undetected; this is until there is a visible sign of foundation damage.

  • Slab swells to the extent of lifting a building; this occurs in areas with extensive soil.
  • A dome or raised section on the floor is an indication of a sewer line leak.

Elusive Leaks.

To be able to identify a slab leak, specialized listening devices are required. This is by turning off the water supply; then there is air pumping into the lines. Therefore, the remaining water in the lines is involuntarily taken out of the lines. Identification of the leak by the plumber is by listening to the escaping air from the pipes. The plumber is to determine the best way of repairing the leak. If pipes are made of, galvanize pipes it is recommended that the whole house is re-plumbed; this is because the old galvanize pipes will continue to spring leaks as they age.

Gaining Access.

To repair a slab leak, one needs to identify the location of the slab. A hole made to expose the pipe, and then the dirt removed in order to reach to the leaking pipes. Slab opening creates a lot of dust; hence, covering is to all valuables.

Repairing Water Lines.

Copper tubing is the most common type of pipe used under a slab foundation. When copper pipes age, they wear out and become thin, springing to a leak. Repairing the copper wire is by cutting the damaged part with a tubing cutter, reciprocating saw or a hacksaw and removing it. Another piece of tubing joined with copper coupling is for replacing the damaged part.

Repairing Sewer Lines.

The piping system can be PVC, iron or clay; this will depend on the age of the house. Special rubber coupling is ideal for connecting the different types of pipes, but experts do not recommend their use beneath concrete slabs, as they deteriorate over time.

 

 

 

 

 

Professional Repiping Services Near you

Professional Repiping Services Near you

Sacramento repipe specialists, are the professionals to look for to address your need for repiping services.  We have several years of experience in the industry. No matter what the job is, we have what it takes to get it done. Even if it is a delicate job like repiping.

Repiping can be defined as a method of completely replacing the existing hot and cold water pipes; that can be for the apartments, residential homes, and commercial buildings. Galvanizing pipes with copper has been the preferred method for repairing the plumbing system, but there is a switch to modern plastic polymers among other options.

repiping services

Repiping is an important method which gives an individual’s home or office:

  1. Great water pressure.
  2. The plumbing system is made more efficient.
  3. There is an enhancement of delivery of hot water.
  4. It eliminates costly water damage repair bills.

Repiping Experts.

This process involves the removal of the existing pipes in a building, and replacing them with the new improved copper pipes and fittings. The new piping system will not only enhance one’s home but also, make the house appear organized and good. As a matter of fact, galvanized steel water pipes inconvenience, discomfort, and aggravation can be put to an end.

This process is not only limited to the water pipes only, but it can as well be applied to gas and sewer pipes also. Homeowners with scaled, corroded pipes have to eventually repipe the entire plumbing system; as there is no other effective way to remove buildup or reverse the scaling process with metallic systems.

Repiping Services.

Pipes can start to corrode or breakdown in such a severe extent; that would lead to the formation of holes or cracks. When this happens, the pros at SUPER MARIO REPIPE need to be contacted. We have trained and licensed plumbers who can handle any kind of repiping services, they will evaluate your system; in order to find out if there is a need to repipe the whole system or to replace one section of the piping, in order to solve the problem.

Our team has over three decades of experience related to this industry, therefore, be assured we have the best workmanship as well as customer care. Moreover, when one requires a repiping services do not procrastinate. Call us as we serve with integrity, which is showcased in our work.

Why You Should Hire Super Mario For Repiping

repiping services

When your plumbing pipes begin to break down or corrode to such an extent where cracks or holes start to appear, it is time to have Super Mario repipe experts to come and check if your pipes needs to be replaced. Our professional trained plumbers will come and evaluate your plumping system. The professionals will determine if your entire home requires a re-pipe or if we can just replace a section of the piping system to solve the problem.

Pex Repiping Locations

Pex Repiping AntelopePex
Repiping AuburnPex Repiping Cameron ParkPex Repiping CarmichaelPex Repiping Citrus HeightsPex
Repiping DavisPex Repiping El Dorado HillsPex Repiping Elk GrovePex Repiping Rancho CordovaPex
Repiping FolsomPex Repiping Sacramento Pex Repiping Fair Oaks Pex Repiping North Highlands Pex Repiping Natomas Pex Repiping Roseville Pex Repiping RocklinPex Repiping LincolnPex
Repiping LoomisPex Repiping OrangevalePex Repiping Rio LindaPex Repiping West Sacramento

Top 2 Reasons to Replace Old Plumbing: Galvanized Pipes

Top 2 Reasons to Replace Old Plumbing: Galvanized Pipes

The piping system used in the pre-1960s was galvanized pipes; it was the bane of old- house plumbing. In fact, houses from that era or even earlier time had high chances of; either having or has had a lot of problems, therefore, it has undergone re-plumbing. There are two major problems encountered in plumbing this includes;

  1. Galvanized pipes

When hot water is turned on, and the pressure is low, the house probably has galvanized pipes that are corroded and plugged up; hence the hot water pipes are first to go. It is important to note that the house can still have a good pressure system. This is because the hot water pipes have the unseen galvanized-pipe problem. Hence, it is possible that the bad pipes were the only one replaced; leaving the old galvanized pipes in the house which is either in need of replacement or will soon need replacement.

galvanized pipes

Experts advise homeowners to replace the whole piping system when the piping starts to go bad, although it is pricey. Homeowners, therefore, prefer the most economical way of a halfway fix by repairing the pipe that has an immediate problem only. Even worse is the fact that the bad galvanized pipe is replaced with more galvanized pipe; instead of using copper or plastic pipe this means that the problem has been extended rather than finding a solution.

Most of the plumbing system is behind the wall, hence making it difficult to determine the whole plumbing picture. Plumbers often run new pipes through the floor which is under the sink instead of through the walls, this ensures that the new plumbing can be seen. As a result, one can get a picture of the plumbing status of a house. If the house in question has crawl space plus one is not discomforted by going into it.

  • Copper in Galvanized Pipes

When copper is attached to galvanized pipes dielectric coupling is required, to stop the corrosion that is caused by dissimilar metals touching. Unfortunately, these junctions could be hidden within the walls, which if the plumber did re-plumbing it certainly would be correct; but if it was a do-it-yourself work the homeowner could not have included the dielectric coupling.

  1. SEWER LINE.

Plumbing is not confined to the house, it starts and ends at the streets. When it comes to the supply side; all the piping on the house side of the meter belongs to the house owner, while everything found on the street side belongs to the water district. The meter should contain a dial which shows minute flow of water, therefore, if you turn off the water supply inside the house and the dial still moves then it is an indication of a leak in the system.

When a house is on a sewer line, then the homeowner owns the line that is from the house to the street, but the line can be worrisome in old houses.

galvanized pipes

Sewer lines can be of plastic, cast iron and clay. The plastic sewer lines, which became common in the 1980s, is durable although it can be crushed. Old cast iron corrodes, and the clay sewer line is particularly susceptible to root intrusion. It is important to note that all types of pipe material can succumb to an impenetrable plug from either diaper, grease or tennis balls.

Old houses just like anything else getting on in years is susceptible to notorious age-related problems. Therefore, when it comes to plumbing problems, galvanized pipes and bad sewer lines are suspected to be the main problems experienced in old houses.

 

The Problem With Tree Roots And Clay Pipes

The Problem With Tree Roots And Clay Pipes

Tree roots are the antagonist of sewer and drain pipes in Puget Sound area. This is mainly common in older homes, where there are chances that eventually one will have to deal with the tree roots invading clay sewer pipes. During prolonged drought seasons this has been proven to be a common nuisance; this is as a result of the tree roots searching for any source of moisture which includes the water flowing through the sewer pipes. The problem of tree roots and clay pipes are really a menace that needs to be addressed appropriately.

Tree Roots And Clay Pipes

When the roots have infiltrated the pipes, they continue to grow in diameter.Hence it further creates or worsens the gaps in the pipes. The roots can break the pipe entirely in severe cases which would lead to the replacement of the pipe. At times the intrusion might not be significant enough to break the pipe, but the roots are likely to obstruct the flow of water and waste in the pipe this will cause backups in fixtures, showers, and toilets.

Problems associated with concrete and clay sewer

  1. The sewer pipes joints were rarely watertight. This is as from the first time they were installed. The spigot which is the narrow end is inserted into the bell on the larger end of the next section of the pipe. The installer runs a bead around the spigot and the bell in order to seal the sewer pipes he uses concrete or mortar. To get the sewer to the required height, the process is repeated. Water can find its way to the roots as the joints were not waterproof, as a result, water seeps out and will find its way to the roots, therefore, attracting the tree roots.
  2. Over an entire length of a typical 100’ long sewer, you can roughly obtain 33 joints or 33 invitations for the tree roots to enter the pipes.
  3. The concrete and clay pipes are heavy as a result; as the ground moves and shifts over a long period of time the pipes can end up sinking into the soil thus creating gaps or worsening them.
  4. The concrete pipes and clay pipes are brittle hence when moving and shifting they can crack or even break leading to entry points for the roots.

How to solve the problems of tree roots and clay pipes

  1. Cutting off the roots from the sewer thus providing temporary relief that can be for a few months or years.
  2. Pipe replacing or pipelining is the best way to prevent roots from growing further in the sewer, once they begin to grow.
  3. Another solution to this problem is pouring a chemical tree root killer down your toilet and let it eradicate the roots for you. The various root killers chemicals are available in a local hardware or plumbing supply store. The chemical contains the corrosive property that kills the roots when they come in contact with the drain pipe.

It is important to note that removing the tree with the damaging roots is not the solution to this problem, as the roots can continue to grow even after the tree has been cut down no matter how long it will take. Even more important is knowing when you need to call a professional plumber. Ensure you contact an expert to address this problem of tree roots and clay pipes.

 

Load More