repiping

Repiping Plumbing Contractor in your Area

Repiping Plumbing Contractor in your Area

,

Why should someone repipe immediately?

Plumbing Contractor

  • Water damage claims can lead in nonrenewal of policies or higher insurance premiums.
  • Undetected water leaks can lead in mold growth.
  • Replacing or repairing sections of copper pipe, which are under a slab are very expensive and temporary.
  • Pinhole leaks can damage furniture, ceilings, flooring, walls, and individual belongings.
  • Damage that arises from pinhole leaks maybe expensive than the re-pipe or repair.

Why this happen to me?

  1. In copper pipes pinhole leaks is commonly referred as “pitting”; and it started more than a decade ago in different parts within the United States.
  2. Studies have indicated that some pitting maybe due to a combination of trace elements in water, chlorine, high pH levels, and absence of natural organic materials that have reduced in drinking water.
  3. Natural organic matter inclines to contribute to the mineral scale build-up, which occur naturally inside the walls of pipe; which ends up insulating and protecting the pipes from pitting.
  4. Repiping your pipe with CPVC pipes is one of the most cost effective and efficient solution for this problem.

What to look from a plumbing contractorPlumbing Contractor

  • Look for a plumbing contractor who will offer hundred percent customer satisfaction as well as peace of mind.
  • Plumbers who will drop their cloths over their work areas and walking paths to protect your house’s flooring.
  • A contractor who know how inconvenient it’s for you to be without water even for one day, hence they can work to solve the problem.
  • A company that is well equipped, and stocked with supplies and parts necessary to provide efficient and quick service.
  • An ideal contractor will test each re-pipe at about 150 psi, this is 3 times the normal working pressure in most water pipe system. This is to make sure their products and workmanship are water tight and meet the required standard.
  • It is advisable piping to be plumbed through attic spaces as well as concealed in walls where possible.
  • Also, the piping in attic should be secured and insulated to protect against the extreme attic temperature and water hammer noises.
THINGS TO KNOW ABOUT REPIPING

THINGS TO KNOW ABOUT REPIPING

,

Repiping is the process of replacing pipes that are used for supply either for domestic or businesses. This is not a temporary fix neither is it a replacement of a short section of the pipe, instead it requires a complete replacement of the plumbing system. There are many reasons that would require one to repipe their home or business. This includes; rusty colored water, leaks from the pipes or even corrosion of the pipes hence leading to low water pressure.

k 2

The repiping process is the installation of a new copper repipe system. The old accessible pipes are removed and replaced with the new plumbing system. The new hard copper USA type “L” is also included in the installation process it’s secured plus well strapped. There is more over the installation of water stops that is ¼ kwik, plus water supply lines of stainless steel are installed. When the installation of the new piping system is done, water will be turned back on. The system will be pressure tested and later be flushed out.

Materials used in Repiping

For a successful repiping to be obtained there ought to be a professional inspection of the site. In order to obtain a standard repiping system, there should be installation of cold and hot domestic water piping from the water source to the existing fixtures and faucets.

While re-piping there are certain materials that are used some are metals while others can be plastic. Metal pipes are galvanized with; copper, brass, steel or iron. While the plastic pipes are; Kitec, Poly Ethylene PE, Poly Vinyl Chloride PVC and Polybutylene among others. Re-piping can be done through sand blasting of the inside of the worn thin pipe and painting with epoxy paint inside the worn pipe.

Copper metal is proven to be the best for re-piping although it is becoming more expensive. This is because copper has a high-class quality and it’s durability makes it the best metal for indoor repiping. Copper is flexible, resistant to rust, light weight and safe. The copper used in re-piping is the hard USA copper that is manufactured, properly protected plus installed. Avoid using soft copper when re-piping.

Factors to be Considered

Repiping of one’s home depends on a lot of factors such as; the distance away from the city’s mainline, the number of the bathrooms and fixtures plus the size of the structure to be repiped. Repiping is not a simple, easy way of repairing it needs special skills plus plumbing experience. Therefore you are required to identify the problem then contact the right contractor who has plumbing experience.